Achieve longer lasting plain bearings in just four steps
By Jared Worth
Tagged: bearings
3 ways to reduce costs of injection-molded parts
The design rules for the most cost-effective injection molding designs apply to plain bearings in particular, to wear parts in general and to all other components. The pressure to cut costs is particularly high for plain bearings and wear...
Why 60+ Plastic Bearing Materials? Your Design Advantage Explained
Engineering challenges aren’t all created the same. Variables like load, speed, temperature, chemical exposure, and hygiene requirements can change what constitutes the right bearing choice. At igus, we’ve developed over 60 plastic bearing materials...
The Hidden Truth About PFAS: What You Need to Know
Introduction PFAS have been making headlines for all the wrong reasons. These synthetic chemicals, often called “forever chemicals,” are everywhere, from industrial processes to everyday consumer goods. But what exactly are they, and why...
How do self-lubricating bearings work?
Original article appeared on https://blog.igus.co.uk/how-do-self-lubricating-bearings-work/ If you know of igus® as a company, you will know that our entire company journey has been based on offering self-lubricating products. This was the initial concept over 60 years ago,...
Polymer ball bearings in cleaning systems for photovoltaic installations
Humans aren’t the only ones who replenish energy in the sun — photovoltaic systems operate solely on this principle. These are exposed to enormous weather effects all year round, and the surfaces reflect this,...
The 2:1 Rule and Defining Fixed/Floating Bearings
When using linear bearings and slides, it’s important to follow the 2:1 rule to avoid binding, chatter, and reduced service life. In this brief tech talk, get expert advice on how to implement this...
5 Reasons to replace PTFE bearings
Over the past 3 decades, there has been a revolution in the advancement and use of highly engineered plastics in bearing applications. In this tech talk, uncover the top 5 reasons to replace PTFE-lined...